Installing Wilwood Calipers, In the realm of automotive performance upgrades, one component that enthusiasts often turn to for improved braking power and responsiveness is the installation of Wilwood calipers. These precision-engineered brake calipers offer enhanced performance and durability, making them a popular choice among car enthusiasts and professional racers alike. In this comprehensive guide, we will walk you through the step-by-step process of installing Wilwood calipers on your vehicle.

1. Understanding Wilwood Calipers:
Before diving into the installation process, it’s essential to have a basic understanding of what Wilwood calipers are and how they differ from stock calipers. Wilwood calipers are known for their lightweight construction, high-performance materials, and advanced design features, all of which contribute to improved braking performance and heat dissipation.

2. Tools and Materials:
Before beginning the installation process, gather all the necessary tools and materials. The following is a list of the primary tools you will need:
– Socket set
– Wrench set
– Brake fluid
– Brake bleeder kit
– Jack and jack stands
– Torque wrench
– Brake line tubing cutter
– Brake line flaring tool

3. Pre-Installation Preparation:
Before installing the Wilwood calipers, it’s crucial to prepare your vehicle. Begin by safely lifting the car using a jack and supporting it with jack stands. Once the vehicle is securely elevated, remove the wheels to access the stock brake components.

wilwood calipers

wilwood calipers

4. Removal of Stock Calipers:
Using a socket set and wrench, carefully remove the bolts securing the stock calipers to the brake assembly. Take note of the orientation of the brake pads and retaining hardware as you will need to reinstall them later.

5. Installation of Wilwood Calipers:
With the stock calipers removed, it’s time to install the Wilwood calipers. Begin by attaching the calipers to the brake assembly using the provided mounting hardware. Ensure that the calipers are properly aligned and securely fastened to the rotor.

6. Brake Line Installation:
Next, install the brake lines supplied with the Wilwood caliper kit. Use a tubing cutter to trim the brake lines to the appropriate length, ensuring a clean and precise cut. Once the lines are cut, use a flaring tool to create a flare at the end of each line, allowing for a secure connection to the calipers.

7. Bleeding the Brakes:
After installing the calipers and brake lines, it’s essential to bleed the brakes to remove any air from the system. Begin by filling the master cylinder with fresh brake fluid and then use a brake bleeder kit to purge the air from the brake lines. Start with the caliper furthest from the master cylinder and work your way towards the closest one, ensuring that all air bubbles are removed from the system.

Wilwood calipers is a rewarding project

Wilwood calipers is a rewarding project

8. Final Checks and Adjustments:
Once the calipers are installed, brake lines are connected, and the system is bled, perform a final inspection to ensure everything is properly aligned and tightened. Double-check all connections and fasteners, and adjust the brake pads if necessary to ensure proper clearance and alignment with the rotor.

9. Test Drive:
With the installation complete, take your vehicle for a test drive to ensure that the Wilwood calipers are functioning correctly. Pay attention to braking performance, pedal feel, and any unusual noises or vibrations. If everything checks out, you’re ready to hit the road with confidence in your upgraded braking system.

Conclusion:
Installing Wilwood calipers is a rewarding project that can significantly enhance the performance and safety of your vehicle. By following the steps outlined in this guide and taking the time to do the job properly, you can enjoy improved braking power and responsiveness for miles to come. So, roll up your sleeves, gather your tools, and get ready to experience the difference that Wilwood calipers can make on your car’s braking performance.